index

ADF Auger Washers are ideal for high volume operations for parts with blind holes or those that require turning, tumbling, or movement for proper cleaning of all surfaces. Auger washers are manufactured to order because part volume, size, and cycle time dictate the proper size of this equipment.

They feature large open hoppers for easy feeding of the parts from pans, conveyors, or chutes and a chip drawer with the mesh screen to collect chips and dirt.

Auger Washers are built with any combination of wash, rinse, and blow-off cycles with other accessories and options available to provide operator and maintenance convenience.

The Model 800 Top Load style washer, remains one of the more popular models in the ADF Line. Because of it's size, versatility and portability it is well suited for a variety of cleaning applications. This washer is used extensively in work cell type applications.

The basket is vinyl coated for protection of machine surfaces and precision parts and can be adapted to hold all types of parts. If it is required that a part be positioned or fixtured for proper cleaning, the standard basket can be used or it can be removed and a custom built fixture or basket used in it's place. The standard or custom baskets can be interchangeable because of the removable feature.

Construction of this washer is for heavy duty and continuous operations and utilizes 304 stainless steel for the spray chamber and reservoir tank.

There are a variety of options available for the washer, including drying, rinsing, oil skimming and a variety of electronic controls. By choosing the proper option, you can tailor the washer for your requirements.

Filtration of the wash solution is standard with this model, including a primary 100 micron felt blanket filter and a secondary cartridge system. With ratings of 3, 5, 10, 25 and 50 micron, the customer can choose the proper cartridge for his requirements.

Simplicity is another feature of the Model 800. The operator places the parts in the basket, closes the lid and activates the push button start switch. For higher volume applications and better ergonomics, an air operated lid option is available. At the completion of the cleaning cycle, the operator can open the lid, remove the parts and start the process over again. If the unit is equipped with the optional air lid, the lid automatically opens at the end of the cleaning cycle.

Safety features are included for the washer and the operator. All ADF Washers are equipped with a safety switch so the machine pump is shut down if the machine is opened during operation. All controls are fused 115 volt with electrical panels located for operator convenience.

This washer is not what it appears to be. It is not a sandblaster, but a high pressure, glove box style, parts washer. Because it is a manual type operation, it is one of the most versatile washers available.

The operator simply puts the part in the washer through the side door and washes the parts by manipulating the part and the wand with his hands through the gloves. The washer is activated with a foot switch. High pressure spray can be put into ports, cavities or directly sprayed on the part, for high pressure cleaning. With the ability to put the nozzle directly at the part, the full 3 GPM at 500 PSI force can be pin pointed to a small area on the part.

The wash solution passes through a 100 micron felt filter before returning to the reservoir and also passes through a high pressure filter between the pump and the nozzle. Therefore, dirt, chips and other contaminates are removed from the solution during every cycle. The washer has an extensive accessory list such as rinsing, oil skimming and others.

This washer is being used in a variety of applications including tool rooms, maintenance operations, low production and precision cleaning situations.

The Model 860 is a high pressure, low volume type washer . This front load model is usually used for taller parts as it provides standard height clearances of 36 and 48 inches. Other height clearances can be provided on a custom basis. Parts can be self supporting or fixtures can by used to support tall parts.

Construction of this washer is for heavy duty and continuous operations and utilizes 304 stainless steel for the spray chamber and reservoir tank.

There are a variety of options available for the washer, including drying, rinsing, oil skimming and electronic controls. By choosing the proper option, you can tailor the washer for your requirements.

Safety features are included for the washer and the operator. The Washer is equipped with a safety switch so the machine pump is shut down if the machine door is opened during operation. All controls are fused 115 volt with electrical panels located for operator convenience.

ADF Flow Through or Conveyor Washers are built for the volume and cleaning requirements of each application. They are available as single or multi-stage washers with conveyor size, speed and components designed to provide high quality cleaning. ADF strongly recommends using stainless steel for pans, spray chambers, and reservoir tanks to prevent rusting and provide years of structural integrity.

ADF provides a variety of options such as belt material, heating systems, pump sizes, oil skimming, PLC's and other electronic features to make the operation automated or operator friendly. Special features on ADF washers are large access panels for maintenance of belts and nozzles, easy and open access to the tanks for cleaning, chip drawers and heavy frames for structural integrity.

The Drawer Washer is designed for large parts and baskets of parts. the roll out turntable feature allows loading from both sides with fork lifts or hoists. The heavy built turntable has a standard weight capacity of 3000 pounds and can be constructed for much higher weights. This family of washers is available in high pressure, low pressure, single or multi-stage, drying, and a host of other accessories.

The new Model 750 Rotary Basket Parts Washer is designed to clean parts that are best suited to being tumbled, rotated, immersed, and sprayed for proper cleaning. It offers the cleaning system needed for parts with blind holes, internal holes, cavities, threads, and those small parts that tend to nest preventing total cleaning. The hydraulic action of the fluid entering and evacuating the cavities offers excellent cleaning and rinsing

The multi-stage version, which includes immersion and spray washing, Immersion and spray rinsing and optional blow off stages, is controlled with a PLC offering the user accurate, precise, process control for the specific part or family of parts being processed. It offers the ability to easily document process control for ISO and other quality control documentation.

Holding with the ADF tradition of letting the customer order the machine that best suits the application, options such as blow off, oil skimming, filtration, ultrasonic cleaning and others are also available. The customer can tailor the machine to their specific application and can invest only in the features they need.

The 750 is a two station washer with each station holding one - 15.7" X 9.6" X 4.5"H basket or two- 9.6" X 6.6" X 4.5"H standard Kadon baskets. This allows cleaning of up to four different parts at the same time.

The 71OT Tumble Washer was designed for parts that need to be moved or turned for cleaning in order to get at difficult areas. For parts with blind holes or those that tend to nest together, the gentle action of the 3 RPM rotation provides part separation so the hot aqueous solution can get to all surface areas. With a double filtration package, oil skimming and other options that are available, the 710 can be adapted to your production requirements.

THE 900 SERIES is a high production batch type washer featuring the use of high pressure impingement to achieve fast and high quality cleanliness for your cleaning operations.

Because of the pass through feature, the 900 Series washers provide high volume and are very suitable for work cell operation. Nozzle patterns are important for any cleaning operation and the hardened stainless steel nozzles are arranged for general cleaning and provide coverage for most parts. However, the nozzles can be easily arranged for special cleaning problems such as recesses, blind holes, and so forth.

The options available for the Model 900 include drying, rinsing, and many others which allow the user to tailor the Model 900 for his particular operations. The standard unit with accessory packages will clean the parts for most applications. For special applications, ADF will work with the customer and provide the equipment he needs.

THE 930 SERIES provides a high volume of water for applications requiring flooding or flushing type washing action. These washers, while producing high volumes, typically operate in the 40 to 70 PSI range depending upon pump size. When your cleaning application requires high volume flushing or flooding action and when you have a high volume of parts, the pass through feature of the 930 will provide for high production quantities.

ADF uses adjustable position nozzle holders which allow directing the nozzles to the area of the parts which require washing. This style of washer is especially good in rebuilding or maintenance applications where large amounts of dirt, grease, and other debris may be present.

This series features stainless steel construction, as noted under the construction specifications and, therefore, provides you service for many years to come. An extensive list of options will allow you to tailor the machine to your specific applications.